Port Forwarding

[L0stAngel]

Hello,
I would like to setup a remote desktop connection to a clients computer located behind a Firebox 700 appliance. There is no router between the internet and the Firebox appliance..I am new to Firebox, and was wondering how I can tell the firebox to forward any connections made to <external ip address>:3389 to <clients internal IP>:3389?

 

[wintek]

Please add a service for port 3389 as mentioned in the following link:

https://www.watchguard.com/support/tutorials/stepconfig_usrsvc.asp

While adding the service ,make sure you select client port as "IGNORE" ( ignore what is says in this documents regarding the port as "client" or "port")

Then configure the NAT as mentioned in the following link:

https://www.watchguard.com/support/advancedfaqs/nat_whenstatic.asp

It should work.