Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Port Configuration For SAN

Status
Not open for further replies.
NyccIT

NyccIT

IS-IT--Management
Jun 4, 2009
10
US
I have a new PS500x I am installing and it will be connected to a stack of 3750 core switches. What would be the recommended port settings for these connections?
 
Sort by date Sort by votes
The primary use for this SAN is to store all virtual machines for our VMWare hosts.
 
Upvote 0 Downvote
Sounds good, the link I provided should help you make all the decisions necessary. Post back if you don't understand something.
 
Upvote 0 Downvote
Spantree portfast and BDPU Guard, if the links/switches are not in a redundant topology. If they are, and the switchports are only connected to the SANs, then spantree portfast is okay and recommended on those ports.

/
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Zero6
  • Locked
  • Question
question about cisco cbs 350-12xs 12 port 10g sfp+
Replies
0
Views
180
Zero6
Zero6
jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
233
jarod_paris
jarod_paris
Gartech
  • Locked
  • Question
LAN Port Test Device
Replies
3
Views
184
ipohead
ipohead
BleuBell
  • Locked
  • Question
Command Rejected : Exceeded NNI ports Allowed
Replies
0
Views
132
BleuBell
BleuBell
amelamel
  • Locked
  • Question
port has faulty link
Replies
2
Views
393
ADB100
ADB100

Part and Inventory Search

Sponsor

Back
Top