Hi,
I'm new to the Avaya world, come from Nortel. I have had the following issues reported to me. Users when ringing externally are experiencing crackling on the line. We have ruled out the network ( all test come back reporting no issue ) this is a remote site which connects back to our main CM site.
Would the following test be useful?
I thought I could take a test phone and put it in the same network region as the problem network region. Once this is done, I could then make external calls and see if I experience the same issue.
I wanted to know what logical steps people take to help to try to troubleshoot this problem. We have had this type of problem before but it has always been the network , but this time I'm confident that it isn't.
I know which trunk groups these phones use to dial out , but how do I build the relationship between the trunk groups used and the ds1 card? My logic being that I could run a ' list measurements ds1 log ' to see if there are any issues on the ds1 cards.
Any information or troubleshooting steps would be greatly accepted.
Many thanks
I'm new to the Avaya world, come from Nortel. I have had the following issues reported to me. Users when ringing externally are experiencing crackling on the line. We have ruled out the network ( all test come back reporting no issue ) this is a remote site which connects back to our main CM site.
Would the following test be useful?
I thought I could take a test phone and put it in the same network region as the problem network region. Once this is done, I could then make external calls and see if I experience the same issue.
I wanted to know what logical steps people take to help to try to troubleshoot this problem. We have had this type of problem before but it has always been the network , but this time I'm confident that it isn't.
I know which trunk groups these phones use to dial out , but how do I build the relationship between the trunk groups used and the ds1 card? My logic being that I could run a ' list measurements ds1 log ' to see if there are any issues on the ds1 cards.
Any information or troubleshooting steps would be greatly accepted.
Many thanks