hawkflorida
Technical User
The system is a UCX50e (sw 4.5). Can you have paging groups where the group members are Polycom VVX telephones?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Polycom VVX Paging on UCX
- Thread starter hawkflorida
- Start date
- Status
To answer an incoming page calls, the Polycom phone's firmware must support SIP header that indicates that the call is to be automatically answered. By default, UCx sends for page/intercom calls the following SIP header to Polycom phones:
[pre]Alert-Info: info=Auto Answer
[/pre]Based on info from various online sources, some Polycom phones might require a different header - for example Alert-Info: Ring Answer. You'd have to find out what SIP header your phones' firmware requires to answer calls automatically...
[pre]Alert-Info: info=Auto Answer
[/pre]Based on info from various online sources, some Polycom phones might require a different header - for example Alert-Info: Ring Answer. You'd have to find out what SIP header your phones' firmware requires to answer calls automatically...
- Thread starter
- #3
- Status
Similar threads
