MerlinLegend
Technical User
Pepperz (Programmer)
3 Oct 03 10:03
thread689-670216
You can conference from a polycom through the Legend, but you must be calling out on it to do conference. If the called party isn't yet ready to conference, have them call back on another extension when they are, then "polycom " out to them.
Hi,
I found the above post while searching on this forum
The question is, can the Legend system be set up so that the person using the Polycom can dial out, connect to a person, then dial out a second time, connect to another person?
We can do the above when the Polycom is connected directly to a regular analog line.
We have Merlin Legend r.3.1 ver 2.0, Hybrid/PBX.
The Polycom SoundSation2 is connected to an MFM board in a MLX-10DP phone. MLX and Polycom (MFM) have separate extensions.
I tried using either the conference or the flash button to join in the second party, but in both cases the call gets terminated when the conference or flash buttons are pressed.
I can dial internal extensions and external numbers from the Polycom. MFM is programmed as a primary-I for MLX ext to which it's attached and it has a cover on another phone.
What do I need to change to get it working? We have WinSPM r.9
Sorry if this sounds amateur - I am just a network admin here trying to do my best with an old phone system. I appreciate a lot your time to read through this and your response.
3 Oct 03 10:03
thread689-670216
You can conference from a polycom through the Legend, but you must be calling out on it to do conference. If the called party isn't yet ready to conference, have them call back on another extension when they are, then "polycom " out to them.
Hi,
I found the above post while searching on this forum
The question is, can the Legend system be set up so that the person using the Polycom can dial out, connect to a person, then dial out a second time, connect to another person?
We can do the above when the Polycom is connected directly to a regular analog line.
We have Merlin Legend r.3.1 ver 2.0, Hybrid/PBX.
The Polycom SoundSation2 is connected to an MFM board in a MLX-10DP phone. MLX and Polycom (MFM) have separate extensions.
I tried using either the conference or the flash button to join in the second party, but in both cases the call gets terminated when the conference or flash buttons are pressed.
I can dial internal extensions and external numbers from the Polycom. MFM is programmed as a primary-I for MLX ext to which it's attached and it has a cover on another phone.
What do I need to change to get it working? We have WinSPM r.9
Sorry if this sounds amateur - I am just a network admin here trying to do my best with an old phone system. I appreciate a lot your time to read through this and your response.