Point to Point

[gcampos]

I have 2 Merlin Legends Point to Point. I set them up with PRI. Bldg A switch Type Legend PBX. Bldg B switch Type Legend Netwk.
Protcol B8ZS,ESF. UDP is working fine both can communicate via UDP Dial plan, but cannot TRANSFER incoming calls across the PRI. I unrestricted Remote access, allowed trunk to trunk transfer on the operator phone.
Allowed Remote Forward. Still same issue.
What I'm I missing?

Thanks in Advance!

 

[TouchToneTommy]

Check LS Reliable Disconnect and TIE trunks Unrestricted

 

[gcampos]

I already unrestrcited Tie trunks, but will check LS Reliable.
Thanks TouchToneTommy!

 

[merlinman]

You will need to set up REMOTE ACCESS (YES) for the TIE & NON-TIE Lines.