PO Return error

[sara403]

Hi

I tried the macro which is shown below, to create a PO return in AAS5.4A. It works fine and create a new return entry

in ACCpac. But the problem is "there is no change in the "quantity on hand" for the item .

Please guide me where i was wrong.


Dim TCOMMENT As String

Dim Session As AccpacCOMAPI.AccpacSession
Set Session = AccpacCOMAPI.AccpacSession
invnum = ""

Session.Init "", "AS", "AS1000", "54A"
Session.Open user, password, database, Date, 0, ""

Dim son As New AccpacSignonManager.AccpacSignonMgr

Dim sid As Long

If Session.IsOpened = True Then
sid = son.RegisterSignon(user, password, database, Date, 0)
Set mDBLinkCmpRW = Session.OpenDBLink(DBLINK_COMPANY, DBLINK_FLG_READWRITE)
End If

Dim temp As Boolean

On Error GoTo ACCPACErrorHandler ' Set error handler


' Declare the views
Dim PORET1header As AccpacCOMAPI.AccpacView
Dim PORET1detail1 As AccpacCOMAPI.AccpacView
Dim PORET1detail2 As AccpacCOMAPI.AccpacView
Dim PORET1detail3 As AccpacCOMAPI.AccpacView
Dim PORET1detail4 As AccpacCOMAPI.AccpacView
Dim PORET1detail5 As AccpacCOMAPI.AccpacView

mDBLinkCmpRW.OpenView "PO0731", PORET1header
mDBLinkCmpRW.OpenView "PO0735", PORET1detail1
mDBLinkCmpRW.OpenView "PO0729", PORET1detail2
mDBLinkCmpRW.OpenView "PO0730", PORET1detail3
mDBLinkCmpRW.OpenView "PO0738", PORET1detail4
mDBLinkCmpRW.OpenView "PO0739", PORET1detail5

PORET1header.Compose Array(PORET1detail2, PORET1detail1, PORET1detail3, PORET1detail4)

PORET1detail1.Compose Array(PORET1header, PORET1detail2, PORET1detail3, Nothing, Nothing, PORET1detail5)

PORET1detail2.Compose Array(PORET1header, PORET1detail1)

PORET1detail3.Compose Array(PORET1header, PORET1detail2, PORET1detail1)

PORET1detail4.Compose Array(PORET1header)

PORET1detail5.Compose Array(PORET1detail1)


Open FILENAME For Input As #1
Dim inputStr As String
Dim word As Variant
Dim TITEMNO As String
Dim TLOCATION As String
Dim TRQRETURNED As String
Dim TUNITCOST As String
Dim THASCOMMENT As String
Dim TVDCODE As String

'READING VALUES FROM FILE

Do Until EOF(1)
Line Input #1, inputStr

If inputStr = "*" Then
Exit Do
Else

word = Split(Trim(inputStr), " ", 2, 1)
Select Case word(0)
Case "VDCODE"
TVDCODE = word(1)
Case "ITEMNO"
TITEMNO = word(1)
Case "LOCATION"
TLOCATION = word(1)
Case "RQRETURNED"
TRQRETURNED = word(1)
Case "UNITCOST"
TUNITCOST = word(1)
Case "HASCOMMENT"
THASCOMMENT = word(1)
Case "COMMENT"
TCOMMENT = word(1)
Line Input #1, inputStr
word = Split(Trim(inputStr), " ", 2, 1)
If word(0) <> "-----" Then
TCOMMENT = TCOMMENT + word(1)
End If
Line Input #1, inputStr
word = Split(Trim(inputStr), " ", 2, 1)
If word(0) <> "-----" Then
TCOMMENT = TCOMMENT + word(1)
End If
End Select
End If
Loop

PORET1header.Order = 1
PORET1header.Order = 0

PORET1header.Fields("RETHSEQ").PutWithoutVerification ("0") ' Return Sequence Key

temp = PORET1header.Exists
PORET1header.Init
PORET1header.Order = 1
temp = PORET1detail1.Exists
PORET1detail1.RecordClear
temp = PORET1detail2.Exists
PORET1detail2.Init
PORET1header.Fields("VDCODE").Value = TVDCODE ' Vendor

temp = PORET1detail1.Exists
PORET1detail1.RecordClear
temp = PORET1detail1.Exists
PORET1detail1.RecordCreate 0

PORET1detail1.Fields("ITEMNO").Value = TITEMNO ' Item Number
PORET1detail1.Fields("LOCATION").Value = TLOCATION ' Location
PORET1detail1.Fields("RQRETURNED").Value = TRQRETURNED ' Quantity Returned
PORET1detail1.Insert

PORET1detail1.Fields("RETLREV").PutWithoutVerification ("-1") ' Line Number

PORET1detail1.Read

PORET1detail1.Read
PORET1detail3.Fields("FUNCTION").PutWithoutVerification ("7") ' Function
PORET1detail3.Process

temp = PORET1header.Exists
PORET1header.Insert

GENPORETURN = PORET1header.Fields("RETNUMBER").Value
MsgBox GENPORETURN + " Is Generated", , "Information"
Close #1


Thanks


Saravana Bavan.T

 

[Jay Converse]

1. For the last time, REMOVE ALL THE TEMP=XXXX.EXISTS LINES FROM YOUR CODE!

2. You said "there is no change in the quantity on hand". Where are you looking?

 

[sara403]

Hi

I am looking in Order entry module.

Thanks

Saravanan.T

 

[ettienne]

Look in IC Location Details.

 

[Jay Converse]

And run IC day-end processing.