soaressteevan
Technical User
Dear,
I Have Programmed SV8300 for pms, its connected to 3rd party pms software, when they do the check in the number gets displayed and when they check out it clears the name.
but the restriction doesnt work once it is checked out, i have done following programs, what i am missing?
0401>10>0 (PMS)
0401>14>0 (PMS-RS232)
4000>0>24 (PMS PORT- 0, FOR UNIT01)
4001>0>0 (7BIT)
4002>0>0
4003>0>1 (EVEN)
4004>0>0(2Bit)
4005>0>1
4006>0>1
4008>0>4 (9600bps)
08>1817>1
08>1818>0
08>1819>1
08>1820>1
08>826>1
42>186>01 (room status code for check in is 01)
42>187>02 (room status code for check out is 02)
ROOM STATUS CODE FOR CHECK IN ROOM STATUS CODE FOR CHECK OUT
4B00>100>2 4B00>200>1
4B00>101>2 4B00>201>2
4B00>102>1 4B00>202>1
4B00>103>2 4B00>203>1
4B00>204>1
4B00>106>1 4B00>206>8
CHECK IN – CHECK OUT PROGRAMMING:
15222>15>0
1245>STATION>15
15393>15>0
42>189>02
ROOM CUT-OFF:
15222>15>0
1245>STN>15
15393>15>0
08>232>1
08>267>0
08>289>1
15403>15>8
15404>15>7
thanks in advance.
I Have Programmed SV8300 for pms, its connected to 3rd party pms software, when they do the check in the number gets displayed and when they check out it clears the name.
but the restriction doesnt work once it is checked out, i have done following programs, what i am missing?
0401>10>0 (PMS)
0401>14>0 (PMS-RS232)
4000>0>24 (PMS PORT- 0, FOR UNIT01)
4001>0>0 (7BIT)
4002>0>0
4003>0>1 (EVEN)
4004>0>0(2Bit)
4005>0>1
4006>0>1
4008>0>4 (9600bps)
08>1817>1
08>1818>0
08>1819>1
08>1820>1
08>826>1
42>186>01 (room status code for check in is 01)
42>187>02 (room status code for check out is 02)
ROOM STATUS CODE FOR CHECK IN ROOM STATUS CODE FOR CHECK OUT
4B00>100>2 4B00>200>1
4B00>101>2 4B00>201>2
4B00>102>1 4B00>202>1
4B00>103>2 4B00>203>1
4B00>204>1
4B00>106>1 4B00>206>8
CHECK IN – CHECK OUT PROGRAMMING:
15222>15>0
1245>STATION>15
15393>15>0
42>189>02
ROOM CUT-OFF:
15222>15>0
1245>STN>15
15393>15>0
08>232>1
08>267>0
08>289>1
15403>15>8
15404>15>7
thanks in advance.