PLS can anyone explain how to install TSE 4.1 SP1 on hp server-raid5 1

[bisontech]

Hi everyone,,

I have one HP proliant DL360 G7 server contains three hard disks,I make Raid 5 using the smart start cd provided with the server.I install the TSE 4.1 SP1 on it.The installation goes smoothly and configuration was correctly done.But at the end of the installation of the TSE 4.1 application I get the following message...

ldap is replicating ......
checking ldap on all lims.....
.
.
.
The installation of multilim system is failed....

Can anyone kindly explain the procedure of making the hp server ready to install the TSE 4.1 SP1 OR TSE 4.1 SP2.
I think there is some mistake i'm doing during the pre-installation configuration of Hp server using start smart cd.
Also plz let me know how much the boot disk volume for SUSE Linux supports.

 

[rfpup]

I have seen an installation with G7 and all the configuration was done from MX-one DVD. Nothing to perform via HP CD/DVD

 

[Sunder2011]

How do i get a copy of this please?