Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PLEX VIEW 3
- Thread starter inlsp08
- Start date
The Plex code database is for internal use Aastra only. Historically most Ericsson local companies had copies of the database but this led to a large number of unauthorized and poor quality customer/market patch adaptations which placed a disproportionate burden on the main support organization. Progressively the access to the source code was withdrawn and the last few companies with access to the code were required to pay a fee for the privilege. Use of this was restricted to fault fixes only and not for adaptations. This particularly led to management at those companies paying for code access to question the logic behind paying for the 'privilege' of fixing Aastra's bugs for them.
Incidentally even when the source code was available to those outside Aastra, there was always one program unit not available and that was LISH![[smile]](/data/assets/smilies/smile.gif "[smile] [smile]")
Incidentally even when the source code was available to those outside Aastra, there was always one program unit not available and that was LISH
- Thread starter
- #3
![[tongue]](/data/assets/smilies/tongue.gif "[tongue] [tongue]")
-
2
- #5
If you are interested in a basic understanding of MD110 software there is a pdf of some training slides called "022-03 MD110 Software slides.pdf"at this link-
- Thread starter
- #6
ok
thank you for your reply
how can insert signal in plex view like that :
<HIMDP;
DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
19:58:45 11FEB14
DIAGNOSTICS FROM LIM 001
NUMBER OF OVERWRITTEN ERRORS IN LIM 001 = 10000
TIME DATE ERROR CODE
19:29:09 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 1F 5F 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
18:48:35 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 29 80 00
TIME DATE ERROR CODE
18:26:46 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 02 2B 00
TIME DATE ERROR CODE
17:39:02 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 02 1D 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
15:19:31 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 29 49 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
15:04:48 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 29 48 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
14:48:08 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 02000B96
ENTER
SWSW B-LEVEL SIGNAL BUFFREE (H'001B)
FROM TMRUM1 (H'265) EXE A IN LIM 001
TO INM (H'02E) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 10
WITH 0 1 2 3 4 5 6 7 8 9
000 02 E1 04 00 08 00 00 00 04 00
STACK ADDRESS = 02001854
SIGNAL SEND ADDRESS = 0200785E
TIME DATE ERROR CODE
13:19:47 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 29 2B 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
12:45:37 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 2E B0 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
12:43:24 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 32 27 00
TIME DATE ERROR CODE
12:35:13 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 02 18 00
TIME DATE ERROR CODE
12:21:39 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:36 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:32 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:29 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:26 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:23 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:19 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:16 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:20:50 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F4 B6
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
thank you for your reply
how can insert signal in plex view like that :
<HIMDP;
DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
19:58:45 11FEB14
DIAGNOSTICS FROM LIM 001
NUMBER OF OVERWRITTEN ERRORS IN LIM 001 = 10000
TIME DATE ERROR CODE
19:29:09 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 1F 5F 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
18:48:35 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 29 80 00
TIME DATE ERROR CODE
18:26:46 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 02 2B 00
TIME DATE ERROR CODE
17:39:02 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 02 1D 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
15:19:31 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 29 49 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
15:04:48 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 29 48 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
14:48:08 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 02000B96
ENTER
SWSW B-LEVEL SIGNAL BUFFREE (H'001B)
FROM TMRUM1 (H'265) EXE A IN LIM 001
TO INM (H'02E) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 10
WITH 0 1 2 3 4 5 6 7 8 9
000 02 E1 04 00 08 00 00 00 04 00
STACK ADDRESS = 02001854
SIGNAL SEND ADDRESS = 0200785E
TIME DATE ERROR CODE
13:19:47 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 29 2B 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
12:45:37 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 2E B0 00
STACK ADDRESS = 020009FC
SIGNAL SEND ADDRESS = 020043E0
TIME DATE ERROR CODE
12:43:24 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 32 27 00
TIME DATE ERROR CODE
12:35:13 11FEB14 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 020030C8
ENTER
SWSW A-LEVEL SIGNAL RELPAT (H'0047)
FROM CMPS16 (H'2E1) EXE A IN LIM 001
TO SCP (H'330) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 02 18 00
TIME DATE ERROR CODE
12:21:39 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:36 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:32 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:29 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:26 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:23 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:19 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:21:16 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F1 F8
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 50 2C
TIME DATE ERROR CODE
12:20:50 11FEB14 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02005DBC
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO CMPS2 (H'2D3) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F4 B6
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 02001C62
It seems to me that this is a BC9 system, so very old. You need to make sure that you have all the latest fixes installed.
Fixing software faults using patches is not an end user function. The location of a software fault is indicated by signals in the HI log but usually signal tracing is required to locate the exact cause. The software error is then corrected by design engineers with a patch which is then, lab tested, beta tested and released.
The system from which your HIMDP came is old and is no longer actively supported by Aastra.
If you are not seeing a problem with the functioning of the system then you can only ignore those faulty signals because there will be no new fixes produced.
Fixing software faults using patches is not an end user function. The location of a software fault is indicated by signals in the HI log but usually signal tracing is required to locate the exact cause. The software error is then corrected by design engineers with a patch which is then, lab tested, beta tested and released.
The system from which your HIMDP came is old and is no longer actively supported by Aastra.
If you are not seeing a problem with the functioning of the system then you can only ignore those faulty signals because there will be no new fixes produced.
- Thread starter
- #8
-
1
- #9
Why do you need to patch the software, is it to fix problems or implement new functions?
To write patches, you must be familiar with Motorola 68xxx assembly language. Not too difficult.
However, you also need the PLEX database (including the patch data) for each MD110 release you want to write patches for but this is restricted to Aastra internal use only.
Ideally you should also have training but this too is for Aastra internal use only.
Patching MD110 is a skill which I believe is in very low demand. (Nobody has asked me to do any for a long time) so you might better spend your time learning a more useful skill like website coding or C# etc.
Bottom line is, I believe that you will find it impossible (should not really use that word I know) to gain the right tools and knowledge to patch MD110.
To write patches, you must be familiar with Motorola 68xxx assembly language. Not too difficult.
However, you also need the PLEX database (including the patch data) for each MD110 release you want to write patches for but this is restricted to Aastra internal use only.
Ideally you should also have training but this too is for Aastra internal use only.
Patching MD110 is a skill which I believe is in very low demand. (Nobody has asked me to do any for a long time) so you might better spend your time learning a more useful skill like website coding or C# etc.
Bottom line is, I believe that you will find it impossible (should not really use that word I know) to gain the right tools and knowledge to patch MD110.
- Thread starter
- #10
hi
no more md110
tsw is have more request
see in one system on dts phone some number have different ring on dts phone i question about that he say i write the patch
i know motorolla vhf & uhf and i am electronic engineer have know with prom& ic programer and bin lang
but if this is forbiden just aastra internal use only i cant do any more because i dont have database .
many thanks
no more md110
tsw is have more request
see in one system on dts phone some number have different ring on dts phone i question about that he say i write the patch
i know motorolla vhf & uhf and i am electronic engineer have know with prom& ic programer and bin lang
but if this is forbiden just aastra internal use only i cant do any more because i dont have database .
many thanks
- Status
Similar threads
