Please Help NIC Problem

[mezanine]

I have a Intel Pro 100\+ I removed using the GUI interface so I could re-add it latter. Now it does not show up in the Netconfig, but it shows up in HW Config. And I am still able to connect to the server over the network. This is on SCO 5.0.6, the network card was dtected on installation. Is there anyway to manually remove?? Or add???

 

[Danne]

Hello !
Dunno if this will help you but under,
/usr/lib/netconfig/info/net0 you should have your nic.
Try to rename that file to net0.old and reboot.

/Danne

 

[mezanine]

Thanks but now for some reason when I do a HWCONFIG I have two LAN adapters eeE0 and eeE1 any suggestions???? Thanks for the previous reply.

 

[tadpcssouth]

have you tried removing it thru scoadmin (not the GUI but in shell)? networks - network configuration - remove network adapter..it might help

 

[mezanine]

Right now I am at the point where no matter where I am (in the GUI or the shell) the card is not displayed in SCO Admin. However when I do a hwconfig the card shows up, and in netstat the card is also there. I think that I should try and manually remove the card, but I havn't the foggiest idea on where to begin. I did try the first response to my cry for help without any luck. I appreciate the responses and will look for anymore that you may have.

Thanks.