Hello everyone:
I'm New.
I've a problem with a VPN between Pix 515 and cisco 827-4V ADSL.
The end point (827) has dynamic Ip and I Can't create the dynamic ipsec tunnel.
Can someone Helpme Please I'm desperate.
Here's the configuration:
Pix 515
access-list mty permit ip x.x.x.x 255.255.252.0 x.x.x.x 255.255.252.0
crypto ipsec transform-set DSL esp-des esp-sha-hmac
crypto dynamic-map lincoln_dsl 1 match address mty
crypto dynamic-map lincoln_dsl 1 set transform-set DSL
isakmp key xxxxxxxx address 0.0.0.0 netmask 0.0.0.0
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash sha
isakmp policy 10 group 1
isakmp policy 10 lifetime 86400
Router 827-4V
crypto isakmp policy 10
authentication pre-share
crypto isakmp key xxxxxxx address x.x.x.x 255.255.255.240
!
crypto ipsec security-association lifetime seconds 28800
!
crypto ipsec transform-set mty-mx esp-des esp-sha-hmac
!
crypto map mexico 50 ipsec-isakmp
set peer x.x.x.x
set transform-set mty-mx
match address 104
Thanks
Bye
I'm New.
I've a problem with a VPN between Pix 515 and cisco 827-4V ADSL.
The end point (827) has dynamic Ip and I Can't create the dynamic ipsec tunnel.
Can someone Helpme Please I'm desperate.
Here's the configuration:
Pix 515
access-list mty permit ip x.x.x.x 255.255.252.0 x.x.x.x 255.255.252.0
crypto ipsec transform-set DSL esp-des esp-sha-hmac
crypto dynamic-map lincoln_dsl 1 match address mty
crypto dynamic-map lincoln_dsl 1 set transform-set DSL
isakmp key xxxxxxxx address 0.0.0.0 netmask 0.0.0.0
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash sha
isakmp policy 10 group 1
isakmp policy 10 lifetime 86400
Router 827-4V
crypto isakmp policy 10
authentication pre-share
crypto isakmp key xxxxxxx address x.x.x.x 255.255.255.240
!
crypto ipsec security-association lifetime seconds 28800
!
crypto ipsec transform-set mty-mx esp-des esp-sha-hmac
!
crypto map mexico 50 ipsec-isakmp
set peer x.x.x.x
set transform-set mty-mx
match address 104
Thanks
Bye