PIX 520 UR license

[mostecryder]

Does anyone know how to tell if a PIX 520 has a UR license or not? "Show ver" did not state the license as UR. Any help is appreciated!

 

[chicocouk]

Post the output of the show version command. If it has a line saying "This pix has a Restricted (R) licence" then, well, it's self-explanatory.

CCSP, CCNA, CCSA, MCSE, Cisco Firewall specialist, VPN specialist, IDS specialist

 

[mostecryder]

this is my output of sh ver on the pix

pixfirewall#
pixfirewall#
pixfirewall#
pixfirewall# sh ver

Cisco PIX Firewall Version 6.2(2)

Compiled on Fri 07-Jun-02 17:49 by morlee

pixfirewall up 26 secs

Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 350 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 00d0.b792.55b3, irq 11
1: ethernet1: address is 00d0.b792.596b, irq 10
2: gb-ethernet0: address is 00d0.b782.2495, irq 15
3: gb-ethernet1: address is 00d0.b7b9.f66e, irq 9
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES: Enabled
Maximum Interfaces: 6
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited

Serial Number: 18034532 (0x1132f64)
Running Activation Key: 0x51a1a26a 0x57eff901 0xc6c172d7 0x4c6adf3b
Configuration last modified by enable_15 at 14:19:58.120 UTC Mon Oct 31 2005
pixfirewall#
pixfirewall#
pixfirewall#

--------------
does this mean that it's a UR because it doesn't have the
"This pix has a Restricted (R) licence" line in it?

 

[NetworkGhost]

I believe it is UR. You have Failover Enabled and I dont htink that is a feature of the restricted license.

 

[NetworkGhost]

Definitly UR. "Inside Hosts: Unlimited