gecko202002
Technical User
My company is currently running on a PIX 501, which was fine but now my company wants to implement VLAN's which the 501 doesn't handle.
I have the router up and running with initial config, but am having problems with the VLAN.
Background - I have a layer 3 switch with my trunk ports built, and can reach the other VLAN's through it. I have a default gateway of the PIX set in the layer 3 switch. Internet access for my 192.168.1.x network is fine.
When I add the VLAN statement designating ethernet1 vlan1 physical, I lose internet access.
I know I am obviously missing a crucial statement, but not really sure where. I presume it is a NAT statement but not sure how to NAT out the VLAN's vs the single interface NAT statement.
I have attached my running config
Any help would be appreciated.
I have the router up and running with initial config, but am having problems with the VLAN.
Background - I have a layer 3 switch with my trunk ports built, and can reach the other VLAN's through it. I have a default gateway of the PIX set in the layer 3 switch. Internet access for my 192.168.1.x network is fine.
When I add the VLAN statement designating ethernet1 vlan1 physical, I lose internet access.
I know I am obviously missing a crucial statement, but not really sure where. I presume it is a NAT statement but not sure how to NAT out the VLAN's vs the single interface NAT statement.
I have attached my running config
Any help would be appreciated.