Pix 515 server ports 1

[jhsbmw]

Pix 515 has new IOS, configuration checked by Cisco, is
connected to two servers w/ seperate IP's. Pix allows
access to server 1 and not server 2. Switch connections
and Pix will allow access to server 2 and not server 1.
Suggestions? Thank you for your help.

 

[baddos]

Need a little more information than you are suppling. How is the topology laid out? Are you using NAT? What do your statics look like?

 

[LKT]

Try alternating the configuration of the two interfaces on the pix within the running-config, this will narrow it down to a config or hardware issue.

I have seen hundreds of problems esculating to hardware issues within the interfaces on the 515s. There are known caveats relating to certain chipsets on the interfaces.

I wouldnt go by the Cisco config checker if thats what you are using.

Andy Simpson CNE, MCSE, CCA, CCNA