PIX 515/515E (6.3) to ASA 5510 (8.0) Site to Site VPN Help

[jondoe0069]

I have a Cisco PIX 515 and 515E at two remote locations that I need to use in a Site to Site VPN setup with an ASA 5510 at my headquarters location. I have gone through many configs and various info and have tried to set up the Site to Site VPN between these devices, but I'm not having any luck getting connectivity between the remote LANs. I've googled for the past few days, looking for an example Site to Site VPN configuration between a PIX and an ASA, but have yet to find anything. Does anyone know where I can find something like this? Thanks in advance for your help!

 

[burtsbees]

Have you tried PDM or ASDM? Also, you may want to post in the PIX forum...

Burt

 

[jondoe0069]

I have PDM on the pix and ASDM on the ASA. I tried using the GUI/ Wizard with no luck. I understand most of what I'm doing in the CLI, but for some reason, it's not connecting, so I just wanted a guide to see if there is anything I might be missing. I will check in that forum and post my configs if necessary. Thanks!