PIX 506E Internet Access

[tsmedley]

I just setup a pix 506e to support 50 or so internal users giving them Internet access, I have the Internal Interface setup as a DHCP server and both Interfaces wide open to see if I could get thing up and running, even though I can ping out though the US LEC equipment to the DNS Servers I can not get the Internet to work from a Work Station, what am I missing. The equipment the PIX will replace (a Netgear Router) works fine and both are set with the same settings.

 

[NetworkGhost]

Post your config. Sounds like a quick fix.

 

[tsmedley]

Sub outside and DNS address with A.B.C and E.F.G


:
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password AgqM4.gG7qpt16Ai encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name ciscopix.com
clock timezone EST -5
clock summer-time EDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside A.B.C.162 255.255.255.248
ip address inside 192.168.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.1.0 255.255.255.0 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 A.B.C.161 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.0.2-192.168.0.100 inside
dhcpd dns E.F.G.8 E.F.G.9
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
terminal width 80
Cryptochecksum:2568a91677239e71d2b41439588ea411
: end

I tried changing the "nat" command to the following:

global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.255.0 0 0

but I am still unable to access the internet.

 

[tsmedley]

Know it is back to
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0

still can't access the internet, what to do ?

 

[caswcu]

route outside 0.0.0.0 0.0.0.0 A.B.C.161 1

the above ip is from what device?

post ipconfig /all from the workstation

 

[tsmedley]

USLEC equipment

 

[caswcu]

can you ping the device from the pix?

post ipconfig /all from the workstations

 

[tsmedley]

Working now, suspect some tables needed to be updated, thanks for your help