PIX 506e & Internal Webserver

[mramirezmnb]

Hi, I am having problems with re-directing traffic from the outside to access my internal webserver. I have tried using the static (inside, outside) x.x.x.x x.x.x.x but every time I use this no is able to access the internet. Is there something else that I'm missing? Thanks.

Here is my config

PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password XXXXXX
passwd XXXXXX
hostname cisco
domain-name XXX.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
pager lines 24
interface ethernet0 auto
interface ethernet1 auto
mtu outside 1500
mtu inside 1500
ip address outside X.X.X.X 255.255.255.0
ip address inside 192.168.X.X 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.X.X 255.255.255.255 inside
pdm history enable
arp timeout 14400
global (outside) 10 X.X.X.X
nat (inside) 10 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 X.X.X.X 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.X.X 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet timeout 5
ssh timeout 5
dhcpd address 192.168.X.X-192.168.X.X inside
dhcpd dns X.X.X.X X.X.X.X
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
terminal width 80
Cryptochecksum:XXXXXXXXX

 

[mramirezmnb]

I got this to work already.