AGonzaga330
MIS
Ok here is my setup.
Please take it easy on me guys since I'm a newb with minimal experience in this field.
So...
PIX 506 connected to cable modem.
dhcp address on the outside interface
68.14.1.1 (make believe address)
Internal Server NAT 10.31.0.160
All other nodes are on the 10.31.0.0 subnet
I want to leave VNC port 5900 open on my PIX506 so I can access my network while I work but for only my company's external address so i'm not attacked by others..heehee
So lets pretend the company I work at's outside IP address is 69.32.1.1
Is there a way for me to access my network from 69.32.1.1 ?
I believe so.
SO i have created an access list with these rules.
access-list RulesForOutside permit tcp host 69.32.1.1 any eq 5900
access-group RulesForOutside in interface outside
Now...is it possible to port forward from my PIX's outside DHCP external address 68.14.1.1 to my NAT address 10.31.0.160 which is running VNC?
Any help would much appreciated. Sorry I suck at this but I'll never know if I dont ask.
Thanks fellas.
Please take it easy on me guys since I'm a newb with minimal experience in this field.
So...
PIX 506 connected to cable modem.
dhcp address on the outside interface
68.14.1.1 (make believe address)
Internal Server NAT 10.31.0.160
All other nodes are on the 10.31.0.0 subnet
I want to leave VNC port 5900 open on my PIX506 so I can access my network while I work but for only my company's external address so i'm not attacked by others..heehee
So lets pretend the company I work at's outside IP address is 69.32.1.1
Is there a way for me to access my network from 69.32.1.1 ?
I believe so.
SO i have created an access list with these rules.
access-list RulesForOutside permit tcp host 69.32.1.1 any eq 5900
access-group RulesForOutside in interface outside
Now...is it possible to port forward from my PIX's outside DHCP external address 68.14.1.1 to my NAT address 10.31.0.160 which is running VNC?
Any help would much appreciated. Sorry I suck at this but I'll never know if I dont ask.
Thanks fellas.