I have a PIX 501 and I'm having a problem using resources on the LAN when I connect via VPN. Once I establish connection to the LAN, I'm unable to ping or connect to any of the devices on the network. I'm connecting to a Windows 2000 server domain. Any help would be appreciated. Unfortunately, I don't have the pix config handy.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PIX 501 VPN Problem
- Thread starter avetix
- Start date
wirelesspeap
Technical User
on the pix, type in this command:
isakmp nat 10
that will enable nat-traversal and it will use udp
port 4500 instead of ESP if the client is coming from
behind a firewall.
isakmp nat 10
that will enable nat-traversal and it will use udp
port 4500 instead of ESP if the client is coming from
behind a firewall.
- Status
Similar threads
- Locked
- Question
- Locked
- Question