Pix 501 VPN Can Not Authenticate Using IAS

[dorego]

Struggling big style, trying to get IAS to authorise AD users....

Cisco VPN Client > Pix 501> IAS Win 2003.

Having the same problem as thread: thread35-1449161

http://www.tek-tips.com/viewthread.cfm?qid=1449161&page=1

Went through all the same guide and below is all i end up with:

User pmore was denied access.
Fully-Qualified-User-Name = ******
NAS-IP-Address = 192.168.1.1
NAS-Identifier = <not present>
Called-Station-Identifier = <not present>
Calling-Station-Identifier = 69.141.246.143
Client-Friendly-Name = Pix
Client-IP-Address = 192.168.1.1
NAS-Port-Type = <not present>
NAS-Port = 159
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = <undetermined>
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 16
Reason = Authentication was not successful because an unknown user name or incorrect password was used.

Help please...

 

[itspoint]

I think you need to reconfigure your IAS using Radius and make sure that you have IP pool and shared secret properly configuured.
Search cisco website for ias configuration or AAA configuration using windows XXXX.