PIX 501 question

[pra4par]

I just got a new PIX 501. I have it up and running but for some reason only port 1 on the 4 port switch will work. I get link lights on all 4 ports but only port 1 will serve dhcp requests. The other 3 ports wont even work if I assign my laptop a static IP. Any thoughts would be great! Here is a config list on my PIX.

PIX Version 6.3(4)
interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password PFPcoSblPHCgz6KH encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname AVLpix
domain-name cisco.com
clock timezone CST -6
clock summer-time CDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 68.15.105.161 255.255.254.0
ip address inside 10.0.0.1 255.0.0.0
ip audit info action alarm
ip audit attack action alarm
ip local pool AVLpublic 10.0.0.100-10.0.0.130
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 68.15.104.1 1
timeout xlate 1:00:00
timeout conn 0:30:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 10.0.0.0 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:1c088c26d35ff4384aff3b559d9b5eda
: end
[OK]


Thanks for the help!

 

[Decryptk33p3r]

You have no DHCPD addresses!
It should look like this:
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd dns 12.127.16.67 12.127.17.72
dhcpd wins x.x.x.x x.x.x.x
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd domain xxxx.com
dhcpd enable inside

This should help you.
Mike