Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pix 501 and Pix 515

Status
Not open for further replies.
thegirlofsteel

thegirlofsteel

IS-IT--Management
Mar 3, 2004
110
0
0
US
Hi..

I finally changed out my PIX 501 for a new device, now I'm getting great connectivity through our cable modem. Now the problem I am getting is I'm not able to see the internal servers from my end. Our exchange and our iSeries.

I think there is one line in my pix 515 at the main that may be the issue and I'm guessing it is a password issue between both sides.

How do you change the isakmp key or password on both devices.

Here are the isakmp key entries on my pix 515 and how the ip address of the pix i am working on looks different.

isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp key ******** address xxx.199.28.2 netmask 255.255.255.255
isakmp key ******** address xxx.199.37.2 netmask 255.255.255.255 no-xauth no-conf
ig-mode
isakmp key ******** address xxx.199.36.26 netmask 255.255.255.255 no-xauth no-con
fig-mode
isakmp key ******** address xxx.53.111.10 netmask 255.255.255.255 no-xauth no-con
fig-mode

Everyone of the other branches have the no-xauth no-con
fig-mode


what is wrong?
 
Sort by date Sort by votes
Is this through the VPN or just NAT/PAT traffic?

For the VPN - You have to delete the lines and re-do them with the new passwords on both devices. Once done, disable isakmp on the outside interface and re-enable it. That should bring the tunnel back up.

For the NAT/PAT - please post a scrubbed config. (Mask the middle two octets of public IPs and remove all passwords.)


Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Upvote 0 Downvote
Hi,

Thanks so much for your help. Do I disable isakmp on the pix 501 side or the main office 515? If I disable it on the main, won't I mess up our other branches??

Thanks again!!! I will try that!

S
 
Upvote 0 Downvote
You should disable then re enable it on both if you are changing the password on both. Yes, it will disrupt the VPNs at the head end device. You should definitely do this after hours. (You can try just changing the passwords without bouncing the isakmp but I have found that to be spotty at best.)


Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Upvote 0 Downvote
do your changes then
no isakmkp enable outside
isakmkp enable outside



Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Upvote 0 Downvote
Ok...there are lots of isakmp key's on the main office pix 515. I am just changing the one with the ip address of the branch correct???
 
Upvote 0 Downvote
Yes - unless you are feeling mischievous... ;-)


Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Upvote 0 Downvote
Ok....I did this on both sides....still nothing
will it help if I send the configs on both sides
 
Upvote 0 Downvote
BRANCH OFFICE PIX
___________________________________________________

PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
hostname shafterpix
domain-name ciscopix.com
fixup protocol dns
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list NoNat permit ip 192.xxx.xxx.0 255.255.255.0 219.xxx.xxx.xxx 255.255.255.0
access-list 101 permit ip 192.xxx.201.x 255.255.255.0 219.xxx.171.x 255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 24.xxx.xxx.2 255.255.255.252
ip address inside 192.168.201.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.1.0 255.255.255.0 inside
pdm location 219.xxx.xxx.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 24.199.28.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.201.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set DefaultSet esp-3des esp-sha-hmac
crypto map BRANCH710 ipsec-isakmp
crypto map BRANCH7 10 match address 101
crypto map BRANCH7 10 set peer 66.XX.X.2
crypto map BRANCH7 10 set transform-set DefaultSet
isakmp enable outside
isakmp key ******** address 66.XXX.XXX.2 netmask 255.255.255.255
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 1
isakmp policy 10 lifetime 86400
telnet 192.168.201.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.201.2-192.168.201.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
____________________________________________________________
MAIN OFFICE PIX
MAINOFF1 Main Office Pix


ip address outside 66.XX.XX.2 255.255.255.0
ip address inside 219.XX.XX.112 255.255.0.0
ip address NETWORK1_Inside 169.X.XX.178 255.255.255.248
ip audit info action alarm
ip audit attack action alarm
ip local pool clientpool 192.168.200.1-192.168.200.254
no pdm history enable
arp timeout 14400
global (outside) 1 interface
global (NETWORK1_Inside) 1 169.X.XXX.179
nat (inside) 0 access-list NoNat
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
nat (NETWORK1_Inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface 3389 219.XXX.XXX.212 3389 netmask 255.255.
255.255 0 0
static (inside,outside) tcp interface 255.255.25
5.255 0 0
static (inside,outside) tcp interface https 219.231.171.212 https netmask 255.25
5.255.255 0 0
static (inside,outside) tcp interface smtp 219.XXX.XXX.52 smtp netmask 255.255.2
55.255 0 0
access-group INBOUND in interface outside
route outside 0.0.0.0 0.0.0.0 66.XX.XX.254 1
route inside 24.XXX.XX.0 255.255.255.0 219.XX.XX.203 1
route NETWORK1_Inside 158.XX.XX.68 255.255.255.255 169.X.XX.177 1
route NETWORK1_Inside 158.XX.XXX.72 255.255.255.255 169.X.XX.177 1
route NETWORK1_Inside 169.X.XX.171 255.255.255.255 169.X.XX.176 1
route NETWORK1_Inside 169.X.XX.172 255.255.255.255 169.X.XX.176 1
route NETWORK1_Inside 169.X.XX.171 255.255.255.255 169.X.XX.176 1
route inside 219.XXX.XXX.0 255.255.255.0 219.231.171.203 1
route inside 219.XXX.XXX.0 255.255.255.0 219.231.171.203 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 219.XXX.XXX.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
no sysopt route dnat
crypto ipsec transform-set DefaultSet esp-3des esp-sha-hmac
crypto dynamic-map clients 5 set transform-set DefaultSet
crypto map MAINOFF1 10 ipsec-isakmp
crypto map MAINOFF1 10 match address 101
crypto map MAINOFF1 10 set peer 24.XXX.XX.2
crypto map MAINOFF1 10 set transform-set DefaultSet
crypto map MAINOFF1 15 ipsec-isakmp
crypto map MAINOFF1 15 match address 102
crypto map MAINOFF1 15 set peer 24.XX.XX.2
crypto map MAINOFF1 15 set transform-set DefaultSet
crypto map MAINOFF1 20 ipsec-isakmp
crypto map MAINOFF1 20 match address 103
crypto map MAINOFF1 20 set peer 24.XXX.XX.26
crypto map MAINOFF1 20 set transform-set DefaultSet
crypto map MAINOFF1 30 ipsec-isakmp
crypto map MAINOFF1 30 match address 104
crypto map MAINOFF1 30 set peer 67.XX.XXX.10
crypto map MAINOFF1 30 set transform-set DefaultSet
crypto map MAINOFF1 200 ipsec-isakmp dynamic clients
crypto map MAINOFF1 client configuration address initiate
crypto map MAINOFF1 client configuration address respond
crypto map MAINOFF1 interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp key ******** address 24.XX.XX.2 netmask 255.255.255.255
isakmp key ******** address 24.XX.XX.2 netmask 255.255.255.255 no-xauth no-conf
ig-mode
isakmp key ******** address 24.XX.XX.26 netmask 255.255.255.255 no-xauth no-con
fig-mode
isakmp key ******** address 67.XX.XX.10 netmask 255.255.255.255 no-xauth no-con
fig-mode
isakmp identity address
isakmp client configuration address-pool local clientpool outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup MAINOFF1 address-pool clientpool
vpngroup MAINOFF1 split-tunnel NoNat
vpngroup MAINOFF1 idle-time 1800
vpngroup MAINOFF1 password ********
telnet 219.XXX.XXX.0 255.255.255.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 60
terminal width 80
Cryptochecksum:1083085ae609548fd53b93c1ddb9e90d
 
Upvote 0 Downvote
Oh btw, I went to the pdm and I noticed that it ignored the access-list lines....is that normal?
 
Upvote 0 Downvote
No.
Try using the CLI. You always get what you type.


Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Sameer258
  • Locked
  • Question
Need Help to Find ip and mac address with email who one open my email
Replies
0
Views
136
Sameer258
Sameer258
xwray
  • Locked
  • Question
PIX 501 DHCP Server function
Replies
0
Views
34
xwray
xwray
Tommy_T
  • Locked
  • Question
Sonic wall - Have an issue remotely connectioning VNC and SMB (and AFP) to one of the 2 ISP circuits
Replies
1
Views
114
nnaarrnn
nnaarrnn
Nitta84
  • Locked
  • Question
navigation slow and tcp syc/ack drop
Replies
0
Views
86
Nitta84
Nitta84
brownmab53
  • Locked
  • Question
PIX 525 ASA not allowing DHCP addresses to pass through to router
Replies
0
Views
42
brownmab53
brownmab53

Part and Inventory Search

Sponsor

Back
Top