pinouts

[theshark8]

can anyone help with this trying to connect option 81 to cisco router the pinouts do not seem to work using this for telnetting please advise correct pinouts

thanks

 

[mluckie1]

You will need a cross over cable if connecting to cisco directly. Will try to find the pinouts.

 

[johnpoole]

are you trying to telnet into the switch from the cisco? if so, can you ping the switch ip? either put a hub between them or just a rolled data cable, the same cable you would need to go ethernet to ethernet between to cisco routers

john poole
bellsouth business
columbia,sc

 

[theshark8]

ok but what would be the pinouts on the pbx back plane to rj 45

 

[johnpoole]

same as any other cat 5

john poole
bellsouth business
columbia,sc

 

[theshark8]

still what are the pinouts on the db 9

 

[Reusser]

if what you are looking for is the DB9 pinout for the TTY Paddleboard:
Northern DB9 DB9 Pinout DB25 Pinout
Paddle Board Standard Standard
2 3 2 TXD
6 2 3 RXD
4 7 4 RTS
9 8 5 CTS
8 6 6 DSR
3 5 7 GRND
1 1 8 DCD
7 4 20 DTR

If not - please be more specific for what connector you need pinouts for.

 

[johnpoole]

sounds like he wants the pinout of the ethernet connection? not sure about the post, the db15 connects to a transeiver and that has a standard cat5 connection. to telnet to the paddle board you would need a lantronix, another ethernet nic style interface

john poole
bellsouth business
columbia,sc

 

[chrisay59]

Why would you want to connect a Router directly to a 81C?