PING!!! >> Deaf ipo

[superguppei]

Hi there,

Any one has te same problem or maybe a solution? ;

Ping ! via network => cisco => Ipo = no pong
Ping ! via network => cisco => any other device = PING!

Ping ! via cisco => Ipo = PING!
Ping ! via cisco => any other device = PING !

Config cisco is identical to config cisco on a working platform.

Config network (routing) is same as working platform

Router=cisco (201.100.x.1)
Ipo =201.100.x.65
other devices vary 201.100.x.2 to 201.100.x.200

Ipo = 500V2 6.0(8), firewall = ALL in/out allowed

Any idea?

 

[jamie77]

IP Route on the IPO

Jamie Green

Football is not a matter of life and death-It is far more important!!!!

 

[amriddle01]

Indeed, +1

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[superguppei]

OHHHMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM

thnx , did the job !

i added 201.100.10.0 in the routes although 201.100.0.0. already existed, and it works now ! , great work!

 

[amriddle01]

Perhaps the subnet mask was incorrect in the existing route

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers

 

[Westi]

201.100.0.0. is not the same as 201.100.10.0 except if you use a 8 bit netmask then it doesn't matter.
The IP route should be 0.0.0.0 mask 0.0.0.0 gateway address should be the correct one and then LAN1
that way you send everything you have to the gateway no matter where it comes from.

Joe W.

FHandw., ACSS

insanity is just a state of mind