Pilot DN setup

[btphoneman]

Need some assistance in setting up Pilot DN for hunt group loads needed to activate DN and load used to enter exntension numbers.

Thanks in advance

Lou

 

[johnpoole]

ld 18
new
ght

in ld 20
prt
ludn.. to find a vacant dn

john poole
bellsouth business
columbia,sc

 

[cmawbey]

To create Hunt Groups you need to use LD18 to store the extensions in the Group Hunt List and LD57, which assigns the Pilot DN to the Group Hunt List.

LD 18
REQ NEW
TYPE GHT
CUST 0
LSNO (Next List Number)
DNSZ (Directory Number Size)
SIZE (Size of list, How many entries)
STOR 00 XXXX (XXXX = Directory Number)
WRT (C/R)
STOR 01 XXXX (XXXX = Directory Number)


Continue with store entries until list completed.

Attaching a Pilot DN (PLDN) to the list number LD 57

REQ CHG
TYPE FFC
CUST 0
CODE PLDN
PLDN (Pilot Directory Number, which must be a unique number on the Meridian)
USE GPHT (Group Hunting)
LSNO List number created in LD 18)
HTYP (RRB=Round Robin, LIN = Linear)
CFWI (NO = Skip Extn if CFW Activated
YES = Terminate on Extn if CFW Activated)
MQUE (ALL = No limit on queued Calls
0 = No calls to be queued
1 = Maximum of 1 call queued)

 

[btphoneman]

Many thanks for the info Gibblett.

Regards.

Lou

 

[LeeMcCauslin]

To further expand on this:
1) does the Pilot DN have to be DID or just any unused DN?
and
2) Whose voicemail gets hit?

I am thinking of making a small hunt group of just 2 positions - help desk and 1 other - IF help desk can't answer, then go to other - but if no answer there, it must go back to first line's voicemail. M3903 phones.

Is a hunt group the best way to do this?

 

[johnpoole]

voicemail gets hit?

i did not see a cp side to this question.. the cp will look at the original dialed dn.. checks the csdn then the list of mb's

john poole
bellsouth business
columbia,sc