Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pictures of ones artwork

Status
Not open for further replies.

swfl

Technical User
Nov 16, 2007
114
0
0
US
Does anyone keep photos of finished work they would like to share? Even rough phases of the job? Not a lot of people get to see the handy work behind the scenes before the servers,switches,patch cords(sometimes brooms, mops, and office supplies) are added.
 
That looks awesome. Thanks a lot. That's what I was looking for. We do a lot of jobs that size and some a bit larger. Thanks again.
 
By the way, the thread before this had a link to an article in a professional cabling magazine that mentioned combing wires.

"While aesthetically pleasing, neatly combed bundles are proving detrimental to cable performance. Randomly laid cables may not look pretty, but yield better results."

How do you suppose one does a sharp job while following that logic? I've spent many an hour trying to get cables straightened out.
 
It is acceptable to comb cabling within the MDF/IDF at short leaghts. CAT 6 has a problem being combed in a run as a whole, crosstalk. Check the manaufacture, they will tell you how much you can comb a group of cable,
 
pic.JPG


Here is one of our closets you might like.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top