Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PHST DISABLED LIST

Status
Not open for further replies.

ERR5020

MIS
Oct 15, 2003
109
US
WHY IS IT THAT MY DISABLED TN'S IN LOOP 60 APPEAR DIFFERENT THAN OTHERS?
% NWS501 4 0 12 : -9
%
% NWS501 44 0 8 : -14
%
% NWS501 52 0 10 : -8
%
% NWS501 56 0 9 : -3
%
% NWS301 60 0 : -2 -3 -8
WHICH CARD ARE THEESE PORTS ON?
 
might be a t1 can't tell, post a cequ (ld 22 req=prt type=cequ)

john poole
bellsouth business
columbia,sc
 
CEQU
MPED 8D
TERM
REMO
TERD
REMD
TERQ 018 019
REMQ
SUPL 004 008 012 020
024 036 040 044
052 056 060
XCT 002 016 032 048
TDS * 002 * 016 * 032 * 048
CONF * 003 * 017 * 033 * 049
MFSD * 002 * 016 * 032 * 048
EXT0 3PE
CNI 012 001 000
CNI 013 000 001
EXT1 3PE
CNI 012 001 000
CNI 013 000 001
MCFN 016 000 016 000 016 000
HAVE NO T1'S IN THIS SYSTEM. ALL COPPER TRKS
 
so i see, do you have something strange (line side phamtom sets) built on supl 60. if not i would stat all the cards on 60 and find it, ld 32 stat 60 0 0 stat 60 0 1 etc..i've almost never seen a switch that size with all copper t1's, t's are cheaper in the us

john poole
bellsouth business
columbia,sc
 
looks like loop 60 is pointing to the whole card and not just a couple of ports.
 
WORKING ON MOVING TO DIGITAL TRKS. WILL FREE UP 15 SLOTS.....ALMOST A WHOLE CABINET. BACK TO THE SUBJECT THERE IS NOTHING UNUSUAL IN 60. ILL STAT EVERY CARD AND SEE , BUT I WAS HOPING SOMEONE OUT THERE HAD AN EASY EXPLANATION........THANKS GUYS
 
those messages are from midnight LD 30 -

NWS501 4 0 12 : -9 indicates that the digital set at 4.0.12.9 did not respond to unit test and is disabled.

NWS301 60 0 : -2 -3 -8 indicates that your cards fail signaling test and are disabled. Possible you have something programmed on 60.0.2 and 60.0.3 and 60.0.8 but no card in slot

Check these in LD 32
 
HERE IS THE STAT FROM LOOP 60.
.STAT 60 0 2

00 = UNIT 00 = IDLE (2616)
01 = UNIT 01 = BUSY (2616)
02 = UNIT 02 = IDLE (2616)
03 = UNIT 03 = IDLE (2616)
04 = UNIT 04 = DSBL (2616)
05 = UNIT 05 = IDLE (2616)
06 = UNIT 06 = IDLE (2616)
07 = UNIT 07 = IDLE (2616)
08 = UNIT 08 = UNEQ
09 = UNIT 09 = IDLE (2616)
10 = UNIT 10 = IDLE (2616)
11 = UNIT 11 = DSBL (2616)
12 = UNIT 12 = IDLE (2616)
13 = UNIT 13 = IDLE (2616)
14 = UNIT 14 = IDLE (2616)
15 = UNIT 15 = IDLE (2616)
.STAT 60 0 3

00 = UNIT 00 = IDLE (2616)
01 = UNIT 01 = IDLE (2616)
02 = UNIT 02 = DSBL (2616)
03 = UNIT 03 = IDLE (2616)
04 = UNIT 04 = IDLE (2616)
05 = UNIT 05 = IDLE (2616)
06 = UNIT 06 = IDLE (2616)
07 = UNIT 07 = IDLE (2616)
08 = UNIT 08 = IDLE (2616)
09 = UNIT 09 = IDLE (2616)
10 = UNIT 10 = IDLE (2616)
11 = UNIT 11 = IDLE (2616)
12 = UNIT 12 = IDLE (2616)
13 = UNIT 13 = IDLE (2616)
14 = UNIT 14 = IDLE (2616)
15 = UNIT 15 = IDLE (2616)
.STAT 60 0 8

00 = UNIT 00 = IDLE (2616)
01 = UNIT 01 = DSBL (2616)
02 = UNIT 02 = IDLE (2616)
03 = UNIT 03 = IDLE (2616)
04 = UNIT 04 = IDLE (2616)
05 = UNIT 05 = IDLE (2616)
06 = UNIT 06 = DSBL (2616)
07 = UNIT 07 = IDLE (2616)
08 = UNIT 08 = IDLE (2616)
09 = UNIT 09 = IDLE (2616)
10 = UNIT 10 = IDLE (2616)
11 = UNIT 11 = IDLE (2616)
12 = UNIT 12 = IDLE (2616)
13 = UNIT 13 = IDLE (2616)
14 = UNIT 14 = IDLE (2616)
15 = UNIT 15 = IDLE (2616)
A FEW DISABLED PORTS BUT NOTHING BUT NOTHING OUT OF THE ORDINARY
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top