Phone PARKED, how to clear remotely

[HIREI]

Hi all!

The phone is parked:
susip:dir=5909; STATUS INFORMATION AT 15:19:13 21FEB08
DIR TYPE TRAFFIC STATE/PTR LINE STATE/PTR DIV STATE ADD INFO
5909 ATS PARKED #0275 BUSY #03D6
END
How to clear it remotely? May be RFPUI, but what PU?

Thanks.

 

[whosrdaddy]

unit ELP6, just know that this will reset ALL analog extensions in the LIM

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[HIREI]

Thanks, whosrdaddy !
We'll be wait until end of working day...

 

[HIREI]

Interesting situation:

Unit ELP6 was restarted, no effect, except PARKED changed for IDLE. Unit TSP (MOH) was restarted - no effect:

<ctdei:dir=5909;
CALL TRACE
INITIATED ON DIR: 5909 EQU: 001-2-40-01
DEVICE TYPE EL 6 PTR: H'275
MP-IN EQU MP-OUT EQU DEV EQU DEV DIR EQU
TS ***** 001-0-30-12 (MOH)

So, RFEXI?
We have BC9 CNI76.

 

[HIREI]

After a while the phone (port) became workable... itself, without RFEXI.

 

[whosrdaddy]

forget to say, DERS1 needed to be restarted also. but this pointer is cleared on the next CRADDR check

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[hrac]

remember that if would like to release foulty connections analog extens, it is necessery restart traffic PU(ELP6)and line PU(DER)
Hi

 

[whosrdaddy]

remember that if would like to release foulty connections analog extens, it is necessery restart traffic PU(ELP6)and line PU(DER)
Hi

I believe I already said that ?



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[hrac]

1 minute ago I tested special signal for release analog extens, which is parked and busy,
SGSAI:UNIT=ELP6,LEVEL=A,SIGAR=1,LIM=X,STYPE=SWSW,SIGNO=86,BYTE=0-X&1-XX&2-00;
byte=0&1 is pointer to ELP6(susip tells what it is)
2 is addrcontrol you can use 00,signal 86 is release to ELP6
believe me it is absolutly clear solution and work properly
if you want to know more contact me v.hrac@seznam.cz

 

[whosrdaddy]

hrac, thanks for the info!
will this work on all sw releases?

PS:
please be aware about the forum rules (no email address posting). the are the tek-tips rules, not mine...


-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[hrac]

whosrdaddy
very sorry, I am newone here.
to your question: Yes it is work on all sw release(TSE is not tested)
Hi

 

[HIREI]

Thanks a lot, guys!