Phone commands on a analog secondary ringer phone.

[Ash575]

We have a Siemens HiPath 3750 system at our location with an analog card.

We have a receptionist phone and they would like to have the ability have the calls roll to a cordless phone so they can carry that with them an answer if they is away from the front desk.

I got it setup in the Call Forwarding tab in Manager E under the SR Target column for the analog phone that is connected.

So when they receive a call and it rolls and answered on this cordless phone, I was told they can push the "Flash" button to put the call on hold or then push *56 then 0-9 to put the call on park.

Are there any other commands like this you can do from the cordless phone?

Thanks.

 

[Bas1234]

Here are some from V6.0.

Return to held call *0
Call forwarding *1
Toggle/Connect *2
Conference *3
Night answer on *44
Trunk flash *51
Mute on *52
DTMF dialing *53
Accept call waiting *55
Park call *56
Call Pickup (Group) *57
Initiate callback *58
Directed Call Pickup *59
Account code *60
Door opener *61
Override *62
Call forwarding to CO (ISDN) *64
View call charges *65
COS changeover on *66
Associated dial *67
Send message *68
Advisory message on *69
Use speed dialing individual/system *7
Speaker call *80
Relay on *90
Key programming *91
Change individual speed-dial numbers *92
Change PIN *93
Phone test *940
System Administration *95
Do Not Disturb on *97
Room Monitor *88
Ringing group *81
Call forwarding off #1
Night answer off #44
Mute off #52
Retrieve call #56
View/delete callback(s) #58
Cancel call forwarding to CO (ISDN) #64
Changeover off #66
View sent message #68
Advisory msg. off #69
Do Not Disturb off #97
Hands free answerback on *96
Hands free answerback off #96
Reset relay #90
Ringing group off - all members removed #81
Reset all services #0
Conference off #3
Query Caller List #82
Associated services *83
MCID *84
Rejoin hunt group *85
Leave hunt group #85
Missed calls - save number *82
Suppress calling ID *86
Enable calling ID #86
Waiting tone off (external) *87
Waiting tone on (external) #87
Ringer cutoff on *98
Ringer cutoff off #98
Start DTMF remote administration *991
Allow DTMF remote administration *992
Allow ISDN remote administration *993
Allow remote data query (inactive) *994
Release door opener with DTMF code *89
Lock door opener with DTMF code #89
Continue an external call after the hold key *63
Assign station numbers (MUSAP) *41
Log on UCD agents *401
UCD - agent log off #401
UCD - agent available *402
UCD - agent not available #402
UCD work on *403
UCD work off #403
UCD night service on *404
UCD night service off #404
UCD - calls in queue *405
Telephone Data Service (TDS) *42
Release trunk *43
PSE: locate *45
PSE: answer #45
Timed reminder on *46
Timed reminder off #46
Activate relocate *9419
Deactivate relocate #9419
Ready for login (CMI phone) *942
System telephone lock *943
Silent monitoring *944
Drop Last Conference Party within CO (USA only)
Call waiting terminating on *490
Call waiting terminating off #490
Language selection *48
Flex Call *508
Ring transfer for MULAP on *502
Ring transfer for MULAP off #502
Call forwarding for MULAP on *501
Call forwarding for MULAP off #501
Freeze trace *509
DISA internal *47
Keypad dial *503
Internal Phonebook *54
Analog Hoteldevice *491
Reset central codelock #943
Call Forwarding Client in Emergency mode on *9411
Call Forwarding Client in Emergency mode off #9411
Voice recording on *493
Voice recording off #493
Call forwarding after time on *495
Call forwarding after time off #495
Discreet Call *945
Data I/O *494


Greetzzz...Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Ash575]

bas1234 - Thanks for your reply.