Phone Code problem, need assistance

[kellygirl01]

Hello all,

Our Meridian phone system has been configured such that on most phones, a code is required to make an external call. This has been done by setting NCOS to zero, and by adding five-digit AUT codes in ld 88.

One remaining problem that we have is that we need the capability to automatically call forward from one phone to a cell phone. Since we put in the code system, this does not work any more, probably because the system is waiting for a code to be input.
Is there anything that can be done to fix this issue ?

 

[PERRYPJ]

GIVE THOSE PHONES A HIGH ENOUGH NCOS TO CALL LOCAL BUT NOT LD, THEY WILL STILL NEED A CODE TO CALL LD

OLD ROLMEN WORKING ON NORTELS

 

[kellygirl01]

Hi PerryPJ,

The phone codes must stay active for Local calls as well as LD. Any alternatives?

 

[PERRYPJ]

NOT THAT I'M AWARE OF, BECAUSE IN ORDER TO FORWARD OF SITE YOU NEED A NCOS HIGH ENOUGH TO DIAL LOCAL. YOU COULD TRY BUILDING A PHANTOM TN THAT IS FORWARED OFF-SITE TO THE CELL PHONE, THEN FORWARD YOUR PHONE TO THE PHANTOM TN. I'VE NEVER TRIED IT BUT IT'S WORTH A SHOOT

OLD ROLMEN WORKING ON NORTELS

 

[MarkDv]

Use the ACOD of the LD Trunk group on that phantom, also cfxa & AUTD in the cls of the all TN's involved.