Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phatom paging tone

Status
Not open for further replies.

jerrby

Vendor
Feb 17, 2005
1
US
Have a Partner ACS (not sure what version but about 5 lines and 12 stations) Every few minutes (estimate 5-7 minutes) the paging tone comes over the paging speakers like someone is getting ready to page but no one is trying to page. Any ideas??
 
what type of paging amp and how is connected to the acs ? (paging port or trunk)
 
The paging tone does not come from the ACS processor. Keep this in mind when troubleshooting. First thing I would do is disconnect the page input from the page port (simply remove the plug from the jack) and see if the problem continues. (I'm assuming also that you are using the page output port on the processor though a page amp or controller that uses a line port shouldn't make a difference here). If the problen continueslook at your paging amp or controller. If not then consider a problem with the ACS processor.

-Hal
 
Something is tripping the page, an intermittent short, most likely a faulty amp. As skip555 suggested it would help to know more about how it's set up.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top