Phaser 860 Err 21.06 1

[aloevera]

I have a phaser 860 in the workshop that, just after switching on, gives the error code "Jet left therm: out of range" Then underneath err 21.06
Any ideas, as this code is not in the 840/850 that we have.
Any help would be most welcome.
Thanks Adrian.

 

[Miker75]

according to the service manual I have a 21.06 is:

Left printhead jetstack thermistor is out of range. Replace the printhead.

Sounds like it's a good candidate for the junkheap

Michael


HP Certified Technician