Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

phaser 850

Status
Not open for further replies.

louisbeaumont

Technical User
Jan 7, 2004
11
CA
We have problem with a phaser 850

At first

the right corner of some sheet is curling
and when I had check under the maintenance drawer
i have found a sensor not broken but I can't tell where
he goes.

I noticed the 2 blue part who maintain the maintenance drawer are broken

I have picture of my part but I don't know if it posible to put my picture on the post

If someone can help me to identify the part I can send the picture by email

Louis.beaumont@umontreal.ca
 
HI

I have finaly order somes parts who where broken

2 guides drawer assembly left and right
the flag kit
and the Stripper assembly upper fru

now i have an endless warming up
the help said the ink is melting but after one hour...

I probably have a problem

How much time the warming last on the 850?
 
the problem with the warming up could be as simple as replacing the Pre-heater assembly bulbs which you can buy at any Home Depot there just small 150W 120V philip's halogen light replacement bulbs usually cost around $12-14 dollars for 2 if that doesn't fix it you'll have to clean and maybe reform the pre-heater bulb contacts with some emery cloth and contact cleaner but thats usally the problem.

hope this helps, Nick NCXI.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top