phaser 850

[louisbeaumont]

We have problem with a phaser 850

At first

the right corner of some sheet is curling
and when I had check under the maintenance drawer
i have found a sensor not broken but I can't tell where
he goes.

I noticed the 2 blue part who maintain the maintenance drawer are broken

I have picture of my part but I don't know if it posible to put my picture on the post

If someone can help me to identify the part I can send the picture by email

Louis.beaumont@umontreal.ca

 

[louisbeaumont]

HI

I have finaly order somes parts who where broken

2 guides drawer assembly left and right
the flag kit
and the Stripper assembly upper fru

now i have an endless warming up
the help said the ink is melting but after one hour...

I probably have a problem

How much time the warming last on the 850?

 

[techguy75]

the problem with the warming up could be as simple as replacing the Pre-heater assembly bulbs which you can buy at any Home Depot there just small 150W 120V philip's halogen light replacement bulbs usually cost around $12-14 dollars for 2 if that doesn't fix it you'll have to clean and maybe reform the pre-heater bulb contacts with some emery cloth and contact cleaner but thats usally the problem.

hope this helps, Nick NCXI.com