Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 850 Fault Code
- Thread starter elway
- Start date
7,002.44:
PM_FAULT_PROCESS_
MOTOR_STALL
The process motor stalled during operation. This has
several possible causes, depending on what the process
motor was gear-connected to at the time of failure.
The above is from the 850 service manual.
*k*t**
PM_FAULT_PROCESS_
MOTOR_STALL
The process motor stalled during operation. This has
several possible causes, depending on what the process
motor was gear-connected to at the time of failure.
The above is from the 850 service manual.
*k*t**
- Status
Similar threads
- Locked
- Question