Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 790 admin password
- Thread starter tekhor
- Start date
irishdavie
Technical User
If user knows current password, it can be changed using the PhaserLink Web tool.
If the password has been lost or is unknown, Reset the NVRAM, If password still cannot be changed or network settings did not reset, the NVRAM chip (PN# 156-4678-00) will need to be replaced. At that time you will be able to access the password set-up using the PhaserLink Web tool after the network values have been re-entered into the printer.
If the password has been lost or is unknown, Reset the NVRAM, If password still cannot be changed or network settings did not reset, the NVRAM chip (PN# 156-4678-00) will need to be replaced. At that time you will be able to access the password set-up using the PhaserLink Web tool after the network values have been re-entered into the printer.
- Status
Similar threads
- Locked
- Question
- Locked
- Question