Phaser 750 error 32

[skippynorm]

My Phaser 750 printer is jamming at A and returns an Error 32. The page is totally printed and gets about 4 inches out of the printer when it jams. I have to tug the page out(it's snug) and recycle the power button to return to printing. I have removed the clutch, cleaned it and lubed it with white lithium grease but it has had no effect. I also scuffed and cleaned the two grey rollers as suggested earlier but that doesn't seem to have any effect. Can you offer any other advice? Thanks.

 

[CULTOFLON]

Accumulator belt cleaning blade movement error.
If the Error 32 is constant:
1.Replace the imaging unit
2.Replace the accumulator cleaner clutch shaft and the cleaning board
3.Replace the engine control board.

If the Error 32 is intermittent:
1.Replace the accumulator cleaner clutch shaft and the cleaning board
2.Replace the imaging unit.
3.Replace the engine control board.

 

[triplejim]

see my post at:

http://www.tek-tips.com/viewthread.cfm?qid=1382936&page=1

 

[skippynorm]

Could you please post pictures addressing error 32? I have performed the steps outlined for error 33 and I am still coming up with periodic error 32 messages. Thanks for your help. Mike

 

[triplejim]

see:

http://www.tek-tips.com/viewthread.cfm?qid=1382936&page=1