TektronixUser
Technical User
Hi All,
Hope someone can help me with this.
My printer is working fine but for two things ! The status page of the printers Consumables does not match the printout, an example of this is the Imaging Unit, on the web pages (the printers web page) it says the life remaining is 77%, but on the printout (on paper printout) it says 76% !
This is also the same with the Fuser, it differs by 1 percent on the printout.
The other thing is the Fuser Roll, the web page says 23%, but the printout says 100% along with 0 pages printed and that it was installed today ! This is not correct as it was installed on the 20th April and the printer has printed over 60 pages since then !
Can anyone throw some light on this ? Is there a way to get the web pages and the printout to tally / be the same. And is there a way to fix this Fuser Roll problem or is this normal with the Fuser Roll ?
I look forward to someones input / help on this as it's got me baffled !
Ian.
Hope someone can help me with this.
My printer is working fine but for two things ! The status page of the printers Consumables does not match the printout, an example of this is the Imaging Unit, on the web pages (the printers web page) it says the life remaining is 77%, but on the printout (on paper printout) it says 76% !
This is also the same with the Fuser, it differs by 1 percent on the printout.
The other thing is the Fuser Roll, the web page says 23%, but the printout says 100% along with 0 pages printed and that it was installed today ! This is not correct as it was installed on the 20th April and the printer has printed over 60 pages since then !
Can anyone throw some light on this ? Is there a way to get the web pages and the printout to tally / be the same. And is there a way to fix this Fuser Roll problem or is this normal with the Fuser Roll ?
I look forward to someones input / help on this as it's got me baffled !
Ian.