Phaser 350- No error on start up No print

[busmechanic]

I Have a phaser 350 in which I moved from one desk to another. I shut down the printer per instructions. waited a day to move it and powered it up. No error messages showed up during start up. I do have 5 errors in history 22,211.32:109346 22,181.38:109350 22,194.33:109350 22,181.38:109365 22,181.38:109372. I have cleaned under the drum sensor and resteated the main board as suggested in other threads. The drum is semi hot to the touch right after start up. I have run 5 or 6 cleaning cycles, 4 or 5 complete power cycles. No ink melts during any of the cycles. Prior to moving it I had great prints. Any ideals thanks.

 

[busmechanic]

Can some one point me in a direction to go with this no melting ink. I watch the display during power up and I thought there use to be a message about melting ink but I do not see that anymore and all I get is clean white papers with no error messages being displayed.