I currently own a Tektronix Phaser 350 printer that is giving me some trouble on startup. It always throws the error code 04,005:100628 of which I have no idea of its meaning. In the rare chance anybody has a list of error codes and their meanings for this old printer I would be very thankful.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 350 Error Code on Startup
- Thread starter Unr3a1
- Start date
- Thread starter
- #2
Failure positioning drum maintenance cam during a drum maintenance
cycle: check drum maintenance cam solenoid, clutch, home sensor, and
related hardware.
On the older Machines the DM Clutch is spring wound, the grease they used gets hard not allowing the clutch to slip the way it was designed. Take the clutch apart clean and relube. Its on the left side of the printer.
cycle: check drum maintenance cam solenoid, clutch, home sensor, and
related hardware.
On the older Machines the DM Clutch is spring wound, the grease they used gets hard not allowing the clutch to slip the way it was designed. Take the clutch apart clean and relube. Its on the left side of the printer.
- Status
Similar threads
- Locked
- Question
- Locked
- Question