Phaser 350 -- connecting through ethernet

[johng316]

HI all,

New here. Just bought a used Phaser 350, and everything seems to work well except for two of the buttons below the LCD display (I'll get to this in another post).

Anyway, I've been trying to figure out how to connect this thing to my home network so that all computers can access it.

I have a basic Linksys router connected to cable modem, I'm using Windows XP Home, and the printer is equipped with the ethernet port, apparently made for a Cat5 cable.

I have the test print that indicates print server name and printer ID, but I don't know what to do from here.

Can anyone offer step-by-step instructions that a newbie could follow?

Thanks!

John G

 

[web2web]

It can be difficult to go over all this in a post. Try this URL:

http://office.support.xerox.com/SRVS/cgi-bin/webcgi.cgi?

new,kb=out98pkb,company={5AC8CA72-62D5-4658-8D6F-D2F393C98A63},ts=xo_legacy,
case=36521,ques=User_Type:4
Make sure you use the complete string, it's long