Phantom users

[divonet]

I have a G3si R6 with phantom users configured. How do you create, change or remove a phantom user?

 

[simreal]

Clarify what you mean by Phantom User please.

Do you mean you have stations labeled phantom user? Or are you refering to something else?

 

[divonet]

Have stations labeled as phantom users.

 

[simreal]

I suspect they are also x ported then?


Often I will build a dummy (phantom) station for various reason.

I cant say what they were built for in your switch but I would say copy the settings and delete them. If some0one complains you'll have the settings to use to rebuild them. I even go so far as to export them using asa so i can rebuild them in seconds.

 

[divonet]

I don't know if they were x-ported or not. If I try to list or display station, the response is that the number belongs to a different object.

 

[SF0751]

It could be almost anything. Use the command "list extension".

Susan
"When the gods wish to punish us, they answer our prayers." - Oscar Wilde, An Ideal husband, 1893

 

[SF0751]

I suspect that you will find that the TYPE, not the name, is Phantom-User. If so, you will find them by using the command "disp sys sec".

Susan
"When the gods wish to punish us, they answer our prayers." - Oscar Wilde, An Ideal husband, 1893

 

[divonet]

When I list extensions, the type is Phantom-user. There is no such object under change, add or remove. displ sys sec deals with system security violations.

 

[SF0751]

Exactly. The "Orginating Extensions" could be your Phantom Users. They are on my system, at any rate.

Susan
"When the gods wish to punish us, they answer our prayers." - Oscar Wilde, An Ideal husband, 1893

 

[Duaneness]

These are most likely extensions for the attendant to park calls. Display console-parameters (disp con), and go to page two, or whatever page the "Shared Common Extensions" are listed on in your version.

- Duaneness