Phantom TN Getting Fast Busy 2

[monty280]

I have created the phantom TN and programmed a 500 set onto it. My call completed when calling externally to an internal number but when I call externally to an external number (DCFW is set to 81xxxxxxxxxx) I get a fast busy. I have tried all variations in the DCFW field and CLS is CFXA. I not sure what else to check.

Option 61 R25 I 40

DES PHANTM
TN 064 0 00 01 PHANTOM
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 4966 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD SHL ABDD CFHD DNDY DNO3
USRD BNRD OCBD RTDD RBDD RBHD FAXD PGND FTTC
PLEV 02
AACS NO
FTR CFW 12
FTR DCFW 12 81xxxxxxxxxx
DATE 14 APR 2004


Thanks in advance,

 

[ssinger1]

Class of service needs to have XFA.

 

[Hghlander]

I had a similar problem. I fixed it by changing it to FTR CFW 24 and FTR DCFW 24 818005551212

 

[monty280]

I changed the CLS to XFA but I'm still getting the fastbusy. Any other suggestions? Thanks.

 

[monty280]

I also changed the FTR CFW and FTR DCFW to 24, but same problem?

 

[MERIDIAN11C]

Do you have in LD 87 NCOS 7 FRL 7?

 

[monty280]

Yes, NCOS 7 = FRL 7

 

[unkalary]

Just for fun change the TGAR to 0 and see it will go then.

 

[monty280]

I changed TGAR to 0 , and still a fast busy.

 

[Nortellian]

Three things to look at: Have you tried a different external number? Can you call this number from a phone? Do regular sets allow you to forward off site when called externally?

 

[monty280]

Yes, Yes, and No

 

[Jay2003]

I take it that 81 is either AC1/2, If so the please post you RLI / RDB amending any string company based.

Can you call the number from your telset, Y/N
If yes then it has to be CLS / NCOS, Check the 500 set.

J

 

[wilsontec]

I also have this problem . I must delete and add the dn to recover the problem . Last I try use acd number to forward the call now still work.

 

[Nortellian]

Load 15 chg rdr enter to option prompt and put in cff. You probably have cfo.

Do a search on this forum to allow phones to forward off site.

 

[monty280]

Thanks Nortellian, that worked!! Thanks to everyone who posted, I can see why everyone says this is the best Nortel forum.

Thanks again,