There is a message that plays after the selected company message that we would like to re record, but we cannot find where it is. I have a Nortel Call Pilot 100 running with a CCR tree. The system is tied into our network for ease of programing. None of the Company messages match this phantom message. Does anyone know where this message might be sitting? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phantom message on Nortel Call Pilot 100
- Thread starter Lawnbouy
- Start date
allworxguy
Vendor
CP plays a greeting and then, if CCR, CCR path 0 plays.
Check the line programming for the table # and then that table to see which CCR it points to.
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
Check the line programming for the table # and then that table to see which CCR it points to.
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
- Thread starter
- #3
curlycord
Programmer
Also check Table/1 (or 2)/AA Menu Prompt
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
- Status
