You need to be on at least Rls 4.0
You need a signalling server
Go to Element Manager on the Signaling Server
Choose IP Telephony
Choose Personal Directories
Under the Server IP Address field, enter the IP address of the *ELAN*
Click Submit
If there are users built, and they already have a station control password set, this will need to be reset under the User Profile tab (there is a pull-down arrow with 4 choices). This will enable the Personal Directories, Call Log, and Redial list to appear on the set. The station control password will reset to the *extension* number on the phone. Then users can manually access their Services/Password Admin to change their SCPW from their phone if they wish.
The signaling server has options that allow you to back up the Personal Directories so that when you do firmware upgrades, the data is saved and can be restored (previously the data was erased after firmware upgrades). You can also copy a Personal Directory from one set to another.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.