PC-REGEN command 2

[paoel]

Hello all,

Is there anyone who can show me the exact command to list all the numbers on the PABX with the kind of telephone type that is used on the hardwarepositions. I thought it was something like pc-regen ?
Is there also a command where i can see if a position (digital) is being actually used or not (is there a telephone on the hardware position)

Thanx in advance

Paul

 

[pixelix]

Hello Paoel

Use the Command "KSCAPIR=ALL;" for System Telphone
and "EXDDPIR=ALL;" for analog Extension.
The Parmeter Itype will show you the Type off programmed Telephon.
The Command to look at the current State from the Extension is "SUSIPIR=XXXX;"

 

[mduser]

Command SYEDP:BPOS=.... will tell you or a hardware position is in use or not.

The PCREGEN data file contains below commands to get all the extension data.

KSCAPIR=ALL; and KSDDPIR=ALL; for Digital extensions.
EXCAPIR=ALL; and EXDDPIR=ALL; for analogue extensions.
ITDAPIR=ALL; for ISDN Extensions.
GEDIPIR=ALL; for Virtual and Free Seating extensions.
GEDIPIR=ALL; and CXAKPIR=ALL; for Integrated Cordless extensions.
IPEXPIR=ALL; for IP extensions.

If you want all data for one extension use SUDIPIR=xxxx;
Use SUDIP=DIR=ALL; to see all digital, analogue, ISDN, Integrated Cordless, IP, Virtual and Free Seating extensions aswell as all Hunt groups and Common Bell groups.