Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PC Name on Sign on Screen-Micros 3700 Res 5.7 MR 4

Status
Not open for further replies.

AM_WG

Programmer
Jan 15, 2019
70
US
Hey Everyone,
We have one property that we bought and already had Micros. At that property, they use a different sign on screen that has the terminal name in the bottom left corner. None of our other properties have this and we would like to add that to them. Does anyone know how to do this? Where the files, if any, are located and how to modify them. It seems to be related to the touchscreen template that is being used for their sign on screen. Thanks for looking.

Andy
 
According to me this is defined by the Touchscreen template. You must select one that brings this property scheduled. An example of one that has it is 103 Table Object1 in Pos Configurator | Devices | Touchscreens | General | Touchscreen Template. This templates are defined in the .cfg files of the ETC directory, for example you can create an OpsDisplayUser.cfg to have custom templates.

In Table Object1 the part that defines this is the following:

InformationBox
Rectangle 711, 0, 55, 256
Active SignIn, Idle, Transaction
right_status 12, -1, center, "ARIAL", 16, BOLD
End
 
One of my coworkers pointed me in the right direction. Use 103 table object 1. Then go into the ts designer and now you can modify the login screen to have a logo, which is what we wanted, or anything else you want on there. Very simple and easy. I am going to deploy this to all our sites this week.
 
You may also set something up under Device Tab - Smart Keys Button
 
@RES3700 can you explain a bit more how you can call the workstation info from a smart key? I dont see that ability. Thanks
 
Device Tab - Smart Keys Button
Hit the plus at the top
Name: WS Name
Save your work
rule type: workstation
Operator: Equal

For the 1st workstation (and all others start here)
hit the plus on the right
workstation: choose your first ws
Legend: actual ws name
Category: Function Touchscreen

for the second ws, rinse and repeat :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top