Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PC Attendant console

Status
Not open for further replies.

atbw3

Technical User
Nov 2, 2006
85
JO
what should be the max. distance between the PC console & MDF?

in our case the distance about 45 meter with a one peice cat5 cable but it is not work, it expermented near the MDF it`s work perfect.
thanks alot
 
I had to run a 25 pair cable just like the 2250.
 
You must have a bad cable or it is wired wrong, as you should be able to goto 900 meters/3000ft.
 
from where you gotS 900 meters? I`ve looked in the NTP`s but found nothing point to the distance/

othe thing is it right tha it needs 2 pairs for 2 digital TN`s programmed as 2250 , and the third digital pair ( w-s) for power, no need to programe the third TN???
 
He got it from the Cat-5 wiring standard 10/100 T is supposed to be good for upto 1000 yards or 3000 ft.
 
You may have a power problem
First 2 TN's for Console
Second 2 TN's tied together for power NOT 1 TN for power.

Or you could use a power adapter at the console instead of the 2 Power TN's.
 

could u pls. give any specification for apower adapter.
volt ? amper ?
 
Suggest you connect all Digital Line TN's from D25 CIU Connection to MDF to give you want you require:-

2 Primary/Seconday TN's
3 Power TN's

Cross Connect

1st w/b b/w Pri pins 26/1
2nd w/o o/w Sec pins 27/2
3rd w/s s/w Pwr pins 30/5
4th r/o o/r Pwr pins 32/7
5th r/g g/r Pwr pins 33/8

Taken from the NTP 553-3001-367 2250 Installation Telsets/Consoles

Cheers!!



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top