PC 2 Panasonic KX-TA 308 connection problem

[elmalla]

I have got a problem connecting my PC 2 Panasonic KX-TA 308 I am using
a RS232c cable and I have used a telephone device to program the PBX
,and i have connected my PC to the PBX using a programmator which could
read the PBX parameters.

I want to capture call logs,using a data dump terminal ,but still
couldn`t get more than the system parameters no more,I couldn`t get any
call
info.

Could you please help in this issue.`

I have configured the PBX to print outgoing calls ,and also configured RS232C parameters as follows:
Com setting : 9600B
8 bits
mark
1-bit

 

[mrpeabody]

You need to use a terminal program, like hyperterminal.

 

[elmalla]

i am already using one called Simple Terminal 1.0,and the problem is that i could only system parametrs data but not call logs,i have tried to change the settings for producing an SMDR but with no output...

 

[skip555]

you need to connect with a null modem cable

panasonic switchs are particular about which one you use

I have found the radio shack ones work the best

 

[delphilord]

I created some delphi code to open a terminal to box.
When computer and box are connected I got call info as raw ascii.
But I want to know is there any wayto get log from from when i connect ?
I mean when computer is not connected to box,are call log saved on box,how to get them out?

I dont know which language you wrote your code.
But email me at delphilord@hotmail.com may we can help each other.

 

[mrpeabody]

"But I want to know is there any wayto get log from from when i connect ?
I mean when computer is not connected to box,are call log saved on box,how to get them out?"

Like most other phone systems, there is no memory or buffer to store calls from the past. You have to leave a dedicated PC plugged in 24 hours a day.